3.9.10. Debug Previous topic Parent topic Child topic Next topic

This parameter enables debugging of the Net::LDAP module. This sets the Net::LDAP debug parameter for the connection, which prints to STDOUT. You can use the following debugging options by adding together the relevant bits. The available values are shown below:
  • 1
    Show outgoing packets (using asn_hexdump)
  • 2
    Show incoming packets (using asn_hexdump)
  • 4
    Show outgoing packets (using asn_dump)
  • 8
    Show incoming packets (using asn_dump)
Here is an example of enabling Debug messages for outgoing and incoming packet using asn_dump:
Debug 12